High Voltage DC Power Supplies

There are currently 2 users online

8 visitors in the last 24 hours

noback.gif - 35.28 K
PO Box 716, Amherst, NH 03031-0716 USA

High Voltage DC Power Supplies
Updated 06/04/08

Privacy Statement

To order, click on the ITEM NUMBER. To enter item numbers from the catalog use: Direct Order Entry

Our laboratory assembled high voltage DC supplies are available as current sources with a defined short circuit current or as a voltage source with a defined voltage at the rated operating current.

The advantages of the current source are realized in the charging of capacitors used for high-energy storage single event discharges intended for rail guns and other electro kinetic and EMP devices. Even at the time the charging cycle starts the current is controlled and remains relatively constant through the charging cycle. The source can also be short circuited where the current is still in a controlled mode. The charge voltage (vt)= f(t) x I all divided by C. This is a linear relationship and does not require the power wasting series resistance used for voltage sources. The disadvantage is that there is a tendency for the voltage to soar above the design ratings. Operation requires preventative measures such as monitoring the charge voltage or an electronic trigger that shuts the sources off when the desired charging voltage is reached.

The advantage of the voltage source approach is the property of maintaining a constant voltage value within the design limits required as current (load) is being drawn. This is an advantage for electric- field charging when used for accelerators, ion beams, isotope enrichment , particle beams, potential generators etc. The disadvantage is that current is not controlled and overloads can damage the circuitry. Charging capacitors now require a power robbing series resistance to control the current. Charging is exponential. Our HVOLTV high power series utilize a bit of both worlds being voltage and current sources by user selection.

High Voltage Trigger Source

Spark gap trigger
Flash tube trigger
Pyroelectric ignitor
Shocker

Universal trigger device generates up to .5 Joules to an external trigger or pulse transformer. Built in selector switch allows repetitive triggering at an adjustable repetition rate or single manual triggering via a push button switch or a jack for precision external single event triggering. Circuit is powered by a 12 volt wall adapter. Includes a 25 kv trigger transformer for basic applications. Utility unit measures 3 3/4 x 5 1/2 x 2 1/4” and weighs less than 1 pound.

IGNITOR10 - Ready to Use...................................................................................$99.95

Capacitor Discharge Driver

CD1 - Plans (By Download - $4.00) ...............$10.00
CD1K - Kit/Plans.......$99.50

Useful laboratory device in intended to pulse drive ignition transformers, CDI coils obtaining pulsed high voltage, high peak current discharges. Capacitor discharge circuitry has adjustable charging voltage pulse discharge rate. An auxiliary input jack is provided for external or synchronized triggering. This driver will produce up to 4 to 5 inch sparks from a good quality automotive ignition coil! Includes a built in 20,000 volt output pulse coil for testing.

Adjustable Pulse Rate Up To 100 Reps/Second
Adjustable Charging Voltage Up To 350 Volts
Pulse Energy Up To .3 Joules

TRIG1K/TRIG10
HV Trigger and Ignitor

Produces a 20,000 volt 1" open-air spark discharge. On board switch allows selection of a high or low energy setting of 180 and 5 millijoules of spark output energy respectively. Repetition rate is 3 or 30 pulses per second. Input and output have wire leads for easy connecting. Intended for triggering spark gap switches for high-speed coulomb energy transfer, igniting flammable gases and atmospheres. Operates from internal, external batteries or 115-vac wall adapter transformer. Ground referenced output circuit provides convenient interfacing to most three terminal devices. Assembly is 7 x 1 ½" board level construction. Kit is an easy to assemble kit with printed circuit board. Ready to use is board level assembly with connecting leads.

TRIG1 - Plans(By Download - $2.50)...................$5.00
TRIG1K - Kit with Printed Circuit Board..............$34.95
TRIG10 - Ready to Use(shown)...........................$54.95

Battery Powered High Voltage Source of DC Power

PBK4K - Power Supply Kit/plans.........$34.95
PBK40 - Assembled Power Supply.....$49.95

Small 1 x 4½" efficient battery powered high voltage source of DC power is capable of producing 10-20 KV from a small, standard 9 volt battery.

It is built on a PCB or a small piece of perforated circuit board and can easily be housed or enclosed as the application requires.

Application range from powering image converter tubes for night vision devices to ignition circuits for flame throwing or producing units, capacitor charging for energy storage, shocking, insect eradication, Kirlian photography, hover craft, ion propulsion electric field generators, ozone producing, etc., etc., etc..

Capacitor Charging

CHARGE5

Battery powered high voltage module is capable of charging capacitors and other field worthy applications. Operates from an 8 "AA", 12Vdc battery pack and can fit into a 1 ½” plastic tube. Generates 5000 volts DC at 5ma. as shown. This module can supply up to 20,000 volts and is available in the following output levels:

CHARGE1 - Plans by download......................................$2.00
CHARGE05 - 5000 volts at 5ma……………...……….$49.95
CHARGE05K - Kit/Plans 5000 volts at 5ma….......….$34.95
CHARGE10 - 10,000 volts at 2.5ma…………………..$59.95
CHARGE10K - Kit/Plans 10,000 volts at 2.5ma….….$39.95
CHARGE20 - 20,000 volts at 1ma…………………….$69.95
CHARGE20K - Kit/Plans 20,000 volts at 1ma……….$44.95

High Voltage Generators

Up to 300,000 VOLTS DC!!
Physicist, Experimenter, Special Projects

These Are Not Static Machines, but Powerful Sources of Usable Current of up to 2000 uamps.

These High Voltage power supplies produce relatively high currents that can be used for experimentation in anti-gravity, BI-FIELD BROWN, force fields, hovercraft research, plasma blasters, drillers, ion motors, propulsion, lightning generation, high ion source, ozone and air purification, electrification, particle acceleration, atom smashing, capacitor charging, general high voltage research, etc..

Six Models to Choose From

Low Cost 100KV @ 200ua Fixed Output With Built in Dry Filled Multiplier, 12VDC or 115VAC

115VAC Lab or 12VDC for Field Use
Adjustable Safety Gap
Dry Fill Multiplier
Available as a Project Kit and Plans
Table Top 4”X 18” Cylinderical Design
Light Weight-LessThan Five Pounds
Excellent Science Project

HVOLT1 - Plans......................................................................$8.00
HVOLT1K - Kit/Plans.........................................................$149.95
HVOLT10 - Ready to Use 12vdc/115vac.......................$249.95

All New
Low Cost 25 KV DC Power Supply

At last an affordable virtually indestructible source of high voltage for the hobbyist and professional. Now be able to experiment with continuous high voltage spark discharges, negative or positive ion generation, high speed ion propulsion motors, capacitor charging, powering small anti gravity lifters, animal and pest control, shocking, night vision power supplies, powering Crookes tubes, Geiger tubes, material testing, corona and Saint Elmo’s fire, static generation, flocking devices, ion ray guns etc..

Circuit produces 25 Kv open circuit with a short circuit current of less than 5 ma. providing a reasonably save high voltage source. Load line is set favorable to ion emitting devices. Circuit has built in open and full short circuit protection and can operate at full output indefinitely. Operation is from any 12 to 15 volt 1 amp dc wall adapter, battery or converter.

Device is basically a two part system consisting of a UL approved high voltage high frequency power supply connected into our five stage open multiplier allowing tap downs in 5 Kv increments. This product would cost many times more than our asking price and is available in volume or individual purchases.

HV25 - Plans (By Download - $2.00) ...................$6.00
HV25K - Kit of High Frequency Power Supply and Parts to Make the Multiplier.............$39.95
HV250 - Assembled Multiplier with High Frequency Power Supply..................................$64.95
14DC/1 - 14volt 1amp Adapter for Above...............$9.95

35,000 Volt Low Cost Power Supply

All new 35 kilovolt at 1.5 milliamp power supply with adjustable current control and large voltage reading meter is both short and open circuit protected. Small, lightweight unit is powered by batteries for field use or a low cost 12vdc/3amp converter for 115 vac use. Attractive, eye-catching unit has a clear plastic cover revealing the circuitry innards. Highly reliable device can be used for powering anti gravity lifters up to 4 feet on a side or as an excellent current source for charging capacitors in EMP, electro kinetic and pulse magnetic systems. May also be used for many laboratory and research applications. Available as a kit or ready to use with options as listed.

Includes a 44 megohm 20 watt built in load resistor.

HV35 - Plans (By Download - $4.00) .........$10.00
HV35K - Kit and Plans......................$129.95
HV350 - Ready to Use......................$159.95

Available Options

12 Volt/7 Amp Converter For 115 Vac Operation For Lab Use 12DC/7 - Ready to Use Converter.........$39.50	12 Volt/4.5 Amp Hour Rechargeable Battery For Field Use BAT12 - Battery...............$14.95
Trickle Battery Charger For Above - Charges in 24 Hours TCHARGER12K - Kit and Plans............$14.95	High Voltage 100 Megohm Resistor For Use With Above High Voltage Unit 100MT - Resistor............$14.95

50KV/5ma Adjustable Current Sourced Power Supply

We now offer our low cost 50KV/5ma adjustable current sourced power supply intended for serious experimentation in anti gravity research, EMP, lossless capacitor charging and other related applications.

Two part system consists of CONTROL CONSOLE attached to the VOLTAGE MULTIPLIER via an umbilical cable. Circuit includes an over voltage shutdown with full short circuit protection and a voltage indicating analog meter. 115/220 at 50/60 hz operation.

HVOLT5V - Plans(By Download - $6.50) ............................$15.00
HVOLT50V - 50KV@4000+uA (Ready to Use)..................$799.95

Higher Powered Units

With Variable Output Plus Other Features

Adjustable Voltage up to 300,000 DC Volts Positive or Negative
Current over 2000 microamps
Choice of 115 / 220 VAC or 12 VDC For Field Use
Two Part Construction Consisting of 24” to 48”Cylinderical
Dry Fill Multiplier Tower-Oil Fill Option Available
High Current Spark Switch/ Safety Gap
High Voltage Indicating Panel Meter
Optional Designs Available

HVOLT100V - 100KV@3MA (Ready to Use).....................$1495.95
HVOLT200V - 200KV@1.5MA (Ready to Use)..................$2495.00
HVOLT300V - 300KV@1MA (Ready to Use).....................$4495.00

Oil Filled Resistive Loads

33MEG - 33 Megohm, 100,000 Volt, 3000 Microamp, 300 Watt Insertable Element............$495.00
133MEG - 133 Megohm, 200,000 Volt, 1500 Microamp, 300 Watt Insertable Element........$595.00
OILBASE - Base and stand with terminations for above elements.
30" height. Uses transformer or vegetable oil, not included......................................................$100 00

Higher Powered Devices On Request

High Voltage Engineering Design Services	High Voltage Design for Research, Trade, Education and Demonstration
We can design or assist in development of high voltage, high current power supplies, pulse conditioning, high energy, EMP, Marx generators, Tesla coils, voltage multipliers, rail and electrokinetic guns, etc.. Our facilities are also available for designing and building action displays for museums and electrical demonstrations.
We Will Buy Your Used or Surplus High Voltage Equipment We are constantly evaluating and purchasing used and surplus high voltage devices and components.
You may contact us by Email or Call: 1-603-673-6493 or Fax: 1-603-672-5406.
Off Shore Manufacturing

Inquiries: 603-673-4730 | Orders: 800-221-1705 | Fax: 603-672-5406 | Email Contact

PO Box 716, Amherst, NH 03031-0716
USA

Site Index

[an error occurred while processing this directive]