PO Box 716, Amherst, NH 03031-0716 USA
	Ion Ray, Charge Guns Updated 06/04/08

        

To order, click on the ITEM NUMBER. To enter item numbers from the catalog use: Direct Order Entry

Ion Ray Gun
Future Technology!

This series of ion ray and force field gun utilizes a self oscillating circuit with a current controlled transformer. The circuit produces a 7 to 9kv high frequency output voltage and an over current shutdown for safety when used in certain experiments as shown. The oscillator output is fed to a full wave voltage consisting of a number of stages that convert and multiply the peak value of the voltage waveform. Output resistors help control the high capacitive discharge currents that could damage the multiplier section. The circuitry is housed in a 1- 5/8" od length of plastic tubing. A 6" length is attached to the main housing to provide a butt handle like a hand gun. This section houses the 8 "AA" battery cell holder and has a strip of conductive metal tape to make contact to the users hand. This forces the users body to the syytem ground and provides a virtual ground for charge return. A simple push button switch controls power to the device.

Project Shocks Without Contact 1-5/8"x 14" Gun Configuration Trigger Switch Internal AA Batteries In Handle

IOG90 Shown

IOG9 - Plans(IOG7/9) (By Download - $6.00) .........$15.00 Low Power Model IOG3K - Kit/Plans of Mini Model - 35 kv/m...........................$49.95
Medium Power Model IOG7K - Kit/Plans of 10 Stages - 60 kv/m............................$99.95 IOG70 - Ready to Use..................$149.95	Higher Power Model IOG9K - Kit/Plans of 15 Stages - 80 kv/m................................$129.95 IOG90 - Ready to Use..................................................................$199.95

Highest Power Adjustable Ion Ray Gun

Unit is housed in a combination gray PVC and clear plastic tubing enclosing the multiplier section. Controls are safety switch and charge field intensity adjustment with push button power control mounted in the pistol grip butt. This section also houses the 8 "AA" battery cell holder and has a strip of conductive metal tape to make contact to the users hand. This forces the users body to the system ground and provides a virtual ground for charge return. Unit is ruggedly built and can be hazardous if used incorrectly. Labeled dangerous.

IOGHP1 - Plans (By Download - $4.00) ...............................$10.00 IOGHP1K - Kit/Plansof 15 Stages - 100 kv Plus/Meter.....................$179.95 IOGHP10 - Ready to Use.............$249.95

Ion Motor
Generate a Real Force Field

IONMOT1K - Kit and Plans..........$49.95

Ion and Electric Field Detector Hand held plastic box with analog meters detects relative level of positive or negative charge fields. This unit is sensitive enough to detect the minute charge produced by just rubbing a piece of plastic and bringing the probe in proximity. It easily measures the electric field during a thunder storm or other high static conditions. Extremely useful for mapping the electric fields associated with high voltage generators or indicating dangerous fields when using sensitive electronic circuits or components. Unit is enclosed in a 5 x 2 x 1" plastic box with a telescoping antenna probe. Contains a sensitivity /power switch and over power LED useful in indicating dangerous electric fields. Basic unit is made for detecting negative ions but in a pinch can be used for positive detection simply by holding the probe antenna and using the circuitry as the pick up probe. Positive units are also available on request. IOD1 - Plans (By Download - $3.00) ........$8.00 IOD1K - Kit/Plans....................$59.95 IOD10 - Assembled................$99.95

High Voltage Engineering Design Services	High Voltage Design for Research, Trade, Education and Demonstration
We can design or assist in development of high voltage, high current power supplies, pulse conditioning, high energy, EMP, Marx generators, Tesla coils, voltage multipliers, rail and electrokinetic guns, etc.. Our facilities are also available for designing and building action displays for museums and electrical demonstrations.
We Will Buy Your Used or Surplus High Voltage Equipment We are constantly evaluating and purchasing used and surplus high voltage devices and components.
You may contact us by  Email  or Call: 1-603-673-6493 or Fax: 1-603-672-5406.
Off Shore Manufacturing

PO Box 716, Amherst, NH 03031-0716 USA

Site Index